ACV EVO S 100, Installation, Use And Maintenance Instructions

Page: 121 / 154

EVO S
, Installation, Commisioning and Servicing Instructions
121
EN
Line
no.
Programming Access Default value Customer setting
1647 Circulation pump operation during legionella function S on
1660 DHW circulation pump release S DHW release
1662 Continuous circ. pump S no
1663 DHW circulation setpoint S 45 °C
1680 DHW rate switching S stop
Consumer circuit 1
1859 Cons request output setpoint T° U 60 °C
1874 DHW load priority S no
1875 Excess heat absorption S 1
1878 With storage tank S no
1880 With prim regul./primar pump S no
Consumer circuit 2
1909 Cons request output setpoint T° M 60 °C
1924 S no
1925 Excess heat absorption S on
1928 With storage tank S no
1930 With prim regul./primar pump S no
Consumer circuit 3
1959 Flow setpoint T° M 70 °C
1975 Excess heat absorption S 1
1978 With storage tank S no
1980 With prim regul./primar pump S no
Pool
2056 Boiler setpoint S 22 °C
Pre-regulator/supply pump
2110 Min. start temperature limitation pre-regulator S 8 °C
2111 Max. start temperature limitation pre-regulator S 80 °C
2130 Mixing valve setpoint over-value Pre-regulator S 7 °C
2150 Pre-regulator/supply pump S after buffer tank
Boiler
2203 Hot release oil/gas below external temp. S 0 °C
2210 Minimum limitation boiler temperature S 8 °C
2212 Maximum limitation boiler temperature S 85 °C
2214 Boiler setpoint in manual mode U 60 °C
2217 Frost protection setpoint S 7 °C
2243 Minimum burner pause time S 5 min
2250 Pump stop timer S 5 min
2253 DHW supply pump timer stop S 1 min
2270 Return temperature limitation S 8 °C
2321 Rot. speed on start S 100%
2322 Minimum boiler pump rotation speed S 40:
60:
70:
80:
100:
120:
150:
34 %
42 %
35 %
40 %
42 %
45 %
41 %