Acteon ImplantCenter M+, User Manual, Page: 4 / 44

6.2 Switching on the medical device 18
6.3 Selecting the operating mode 18
6.3.1 Common operations using the footswitch 18
6.4 Connecting and disconnecting M+ accessories during use 19
6.5 Switching off the medical device 19
7 Configuring the medical device 21
7.1 Adjusting the medical device volume 21
7.2 Adjusting the screen brightness 21
7.3 Adjusting the lighting timer 21
7.4 Recovering the medical device's factory settings 21
7.4.1 I-Surge mode factory settings 22
7.4.2 Piezotome mode factory settings 22
7.4.3 Newtron mode factory settings 22
7.5 Personalising a contra-angle or handpiece 22
8 Cleaning, disinfecting and sterilising 23
8.1 Cleaning and disinfecting the medical device 23
8.2 Cleaning, disinfecting and sterilising accessories 23
9 Monitoring and general maintenance of the medical device 25
10 Maintenance 27
10.1 Touch-sensitive screen messages 27
10.1.1 Problem at start up 27
10.1.2 Missing handpiece 27
10.1.3 I-Surge LED micromotor missing 27
10.1.4 Finding the software version 28
10.2 Identifying incorrect operation 28
10.2.1 Not working 28
10.2.2 The power is not as expected 28
10.2.3 No spray or very little amount of spray 29
10.2.4 Light not working or too dim 29
10.2.5 Water leakage 29
10.2.6 Ultrasounds not working 29
10.3 Corrective maintenance 30
10.3.1 Replacing the fuses 30
11 Technical specifications of the medical device 31
11.1 Identification 31
11.2 Control unit 31
11.3 Generator 31
11.4 Screen 31
11.5 Length of cords 31
11.6 I-Surge LED micromotor 32
11.7 Irrigation 32
11.8 Footswitch 32
11.9 Environmental characteristics 32
11.10 Environmental restrictions 32
11.11 Main performance characteristics 32
12 Regulations and standards 33
12.1 Official texts 33
12.2 Medical class of the device 33
12.3 Standardised symbols 33
12.4 Manufacturer identification 34
12.5 Branch addresses 35
13 Disposal and recycling 37
14 Index 39