Acteon ImplantCenter M+, User Manual, Page: 24 / 44

7.4.1 I-Surge mode factory settings
Programme Contra-angle ratio Speed at end of tool Torque at end of tool Irrigation
P1 20:1 1200 rpm 80 N.cm 80 ml/min
P2 20:1 800 rpm 80 N.cm 100 ml/min
P3 20:1 15 rpm 20 N.cm 100 ml/min
P4 20:1 30 rpm 20 N.cm 0
7.4.2 Piezotome mode factory settings
Programme Power Irrigation
Very powerful D1 3 60 ml/min
Powerful D2 3 60 ml/min
Average power D3 3 60 ml/min
Low power D4 3 60 ml/min
7.4.3 Newtron mode factory settings
Programme Power Irrigation Main functions
Green Soft P = 5 15 ml/min Periodontics
Yellow Medium P = 5 15 ml/min Endodontics
Blue High P = 5 15 ml/min Scaling
Orange Boost P = 5 15 ml/min Loosening
7.5 Personalising a contra-angle or handpiece
1. Switch on the medical device.
2. Press
.
3. Press
.
4. Enter the handpiece contra-angle ratio as specified by the manufacturer, using the keypad
5. Rpm and Ncm values are recalculated automatically.
6. Press to save the values.
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
22
/
42