Acteon ImplantCenter M+, User Manual, Page: 27 / 44

9 Monitoring and general
maintenance of the medical device
Before and after use, check the medical device and its accessories entirely for any problems. This is necessary
to detect any isolation fault or damage. If necessary, replace damaged parts.
Check that the air inlets on the control unit are clean to prevent any overheating.
The clips holding the irrigation lines may cause wear of the handpiece cords. Check each handpiece
cord individually before and after use.
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
25
/
42