Acteon ImplantCenter M+, User Manual, Page: 29 / 44

10 Maintenance
Maintenance of the medical device essentially involves preventive maintenance operations, covering the
following aspects:
l
checking of accessories;
l
everyday cleaning, disinfection and sterilisation ;
l
cleaning.
10.1 Touch-sensitive screen messages
Use the touch-sensitive screen to configure the medical device. Depending on your actions, one or more of the
following elements will be displayed.
10.1.1 Problem at start up
Symptom: the medical device beeps and displays the following pictogram:
Possible causes Solutions
Internal error during start up: there is no
communication between mother board and screen
- Switch off the medical device (I/O switch to O).
- Wait 5 seconds before switching it back on.
- Switch the device on (I/O switch to I) and don't touch
any of the buttons while it is starting up.
10.1.2 Missing handpiece
Symptom: the medical device beeps when the user presses the footswitch and displays the following pictogram:
Possible causes Solutions
Faulty connection between the handpiece cord
and the medical device
- Connect the handpiece cord to the medical device.
- Switch off the medical device (I/O switch to O).
- Wait 5 seconds before switching it back on.
- Switch the device on (I/O switch to I) and don't touch any of
the buttons while it is starting up.
10.1.3 I-Surge LED micromotor missing
Symptom: the medical device beeps and displays the following pictogram:
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
27
/
42