Acteon ImplantCenter M+, User Manual, Page: 16 / 44

5 User interface
Pictograms
shared by the three
modes
Meaning
Start/stop purge
Displays the flow in ml/min
Irrigation ON
Irrigation OFF
Adjusts the irrigation flow rate.
Handpiece lighting on
Handpiece lighting off
Progressive footswitch
Smooth footswitch
Warning. The type of warning is specified by a pictogram at the centre of the triangle.
Saves any changes
5.1 I-surge mode
Before using the I-Surge mode, read the setting recommendations specified by the contra-angle or
handpiece manufacturer
Pictograms
for the I-Surge
mode
Meaning
Current contra-angle - press the pictogram to select a different contra-angle or personalise a
specific contra-angle
Revolutions per minute- adjust this value using the + and - pictograms on the screen
Newton per centimetre - press the pictogram to adjust the torque of the force applied at the
outlet of the contra-angle
In P1, P2 and P3, adjust the number of revolutions per minute directly. In P4, adjust the torque in
real time.
Select programme P1 - Marking of the implant site
Select programme P2 - Pilot drilling
Select programme P3 - Boring/drilling
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
14
/
42