Acteon ImplantCenter M+, User Manual, Page: 23 / 44

7 Configuring the medical device
In addition to normal use of the medical device, the following parameters can be configured:
l
medical device volume
l
screen brightness
l
lighting timer
l
factory settings
7.1 Adjusting the medical device volume
1. Switch on the medical device.
2. From the home screen, press
to open the menu.
3. Identify the pictogram that indicates volume
.
4. Press or to adjust the volume.
5. Press
to save the settings and start the medical device.
Or press to exit the settings screen without saving the changes.
7.2 Adjusting the screen brightness
1. Switch on the medical device;
2. From the home screen, press to open the menu.
3. Identify the pictogram that indicates brightness
.
4. Press or to adjust the screen brightness.
5. Press
to save the settings and start the medical device.
Or press to exit the settings screen without saving the changes.
7.3 Adjusting the lighting timer
Press the footswitch to start the handpiece and release it to stop the handpiece. Once the handpiece is stopped,
it will continue lighting up the treatment site during the time out period.
1. Switch on the medical device.
2. From the home screen, press
to open the menu.
3. Identify the pictogram that indicates lighting
.
4. Press
or to adjust the time out.
5. Press
to save the settings and start the medical device.
Or press to exit the settings screen without saving the changes.
7.4 Recovering the medical device's factory settings
1. Switch on the medical device.
2. From the home screen, press
to open the menu.
3. Press
to recover all the factory parameters.
4. Press
to save the recovery and start the medical device.
Personalised contra-angles and changes made to programmes will be deleted from the medical device's
memory.
Or press to exit the settings screen without saving the changes.
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
21
/
42