AR-B1380/AR-1380A User’ s Guide
Page 4
0.5 TECHNICAL SUPPORT AND USER COMMENTS
User’ s comments are always welcome as they assist us in improving the usefulness of our products and
the understanding of our publications. They form a very important part of the input used for product
enhancement and revision.
We may use and distribute any of the information you supply in any way we believe appropriate without
incurring any obligation. You may, of course, continue to use the information you supply.
If you have suggestions for improving particular sections or if you find any errors, please indicate the
manual title and book number.
Please send your comments to Acrosser Technology Co., Ltd. or your local sales representative.
Internet electronic mail to:
0.6 ORGANIZATION
This manual covers the following topics (see the Table of Contents for a detailed listing):
l
Chapter 1, “Overview,” provides an overview of the system features and packing list.
l
Chapter 2, “ System Controllers,” describes the major structure.
l
Chapter 3, “ Setting Up the System,” describes how to adjust the jumpers, and the connector
settings.
l
Chapter 4, “ CRT/LCD Flat Panel Displays” , describes the configuration and installation
procedure by using LCD and CRT displays.
l
Chapter 5, “ Software Installation,” describes the utility diskette, solid state disk’ s write protect
function, and the watchdog timer.
l
Chapter 6, “ Solid State Disk,” describes the various types of SSD’ s installation methods.
l
Chapter 7, “ BIOS Console,” providing the BIOS settings.
l
Chapter 8, Specifications & SSD Types Supported
l
Chapter 9, Using the Memory Banks
l
Chapter 10, Placement & Dimensions
l
Chapter 11, Programming the RS-485
0.7 STATIC ELECTRICITY PRECAUTIONS
Before removing the board from its anti-static bag, read this section about static electricity precautions.
Static electricity is a constant danger to computer systems. The charge that can build up in your body may
be more than sufficient to damage integrated circuits on any PC board. It is, therefore, important to observe
basic precautions whenever you use or handle computer components. Although areas with humid climates
are much less prone to static build-up, it is always best to safeguard against accidents that may result in
expensive repairs. The following measures should generally be sufficient to protect your equipment from
static discharge:
1) Touch a grounded metal object to discharge the static electricity in your body (or ideally, wear a
grounded wrist strap).
2) When unpacking and handling the board or other system components, place all materials on an
antic static surface.
3) Be careful not to touch the components on the board, especially the “golden finger” connectors
on the bottom of every board.
Summary of Contents for AR-B1380
Page 2: ......
