AR-B1380/AR-1380A User’ s Guide
Page 54
Figure 6-4 UV EPROM (27CXXX) Switch Setting
Function
M1-M3 Setting
JP6 Setting
1MX8 EPROM (ONLY)
EPROM:
128Kx8, 256Kx8,
512Kx8
Table 6-9 UV EPROM Jumper Setting
(2) Software Programming
Using the UV EPROM, please refer to the follow steps:
Step 1:
Turn on the power and boot DOS from the hard disk drive or floppy disk drive.
Step 2:
Make a Program Group File (*.PGF file)
Step 3:
Use the RFG.EXE to generate ROM pattern files, and count the ROM numbers as the
pattern files edited by the user.
Step 4:
Under DOS prompt type the command as follows.
C:\>RFG [file name of PGF]
Step 5:
In the RFG.EXE main menu, choose the <Load PGF File> item, that is *.PGF file.
Step 6:
Choose the <Generate ROM File(s)>, the tools program will generate the ROM files,
for programming the EPROMs.
Step 7:
Program the EPROMs
Using the instruments of the EPROM writer to load and write the ROM pattern files
into the EPROM chips. Make sure that the EPROMs are verified by the program
without any error.
Step 8:
Install EPROM chips
Be sure to place the programmed EPROMs (R01, R02….) into socket startin
g from MEM1 and ensure that the chips are installed in the sockets in the proper
orientation.
Summary of Contents for AR-B1380
Page 2: ......
