Acrosser Technology AR-B1380 User Manual Download | Manualshive

Page: 69 / 79

background image

AR-B1380/AR-B1380A User’ s Guide

Page 67

Watch Dog Timer Output Control

This option selects the Watch Dog Timer period which is from

30 Seconds to 120 Seconds

. The default

value is

Disabled

which the watch dog Timer function disables.

Available options: 30SEC, 60SEC, 75SEC, 90SEC, 105SEC, 120SEC,

Watch Dog Timeout Period Trigger Signal

To configure this function, the user must select a period of time in the above item to enable the watch dog
Timer. The value, Reset, means to reset the system every certain period of time. When another value,
(either IRQ3, IRQ4, IRQ9, IRQ10, IRQ11, IRQ12, or IRQ15) is selected, the watch dog Timer will generate
a pulse to trigger the device set to that IRQ every certain period of time.

Available options: IRQ3, IRQ4, IRQ10, IRQ10, IRQ11, IRQ12, IRQ12, IRQ12, IRQ15, RESET

7.5 PERIPHERAL SETUP

This section is used to configure the peripheral features.

Hard Disk Delay

If this option is set to

Disabled

and the system BIOS executes too fast, the result is that the BIOS can’ t find

the hard disk drive. Therefore, it is recommended to select a hard disk delay period to prevent the BIOS
from executing too fast.

Available options: 3sec, 5sec, 10sec, 15sec.

OnBoard Primary IDE

This options specifies the onboard IDE controller channels that will be used.

Available options: Enabled, Disabled.

OnBoard FDC

This option enables the floppy drive controller on the AR-B1380/1380A.

Available options: Auto, Enabled, Disabled.

OnBoard Serial Port 1

This option enables the serial port on the AR-B1380/1380A.

Available options: Disabled, 3F8h, 2F8h, 3E8h, 2E8h

«
...
67
68
69
70
71
...
»

Summary of Contents for AR-B1380
















































































Reviews:

No comments

Related manuals for AR-B1380

Brand: GE Pages: 6

ROADRECORDER 8000

Brand: Safety Vision Pages: 40

Brand: Usr Pages: 2

Magic WiFi mini Ek

Brand: Devolo Pages: 22

Brand: Lanner Pages: 63

Brand: Keithley Pages: 71

Brand: u-blox Pages: 29

Brand: Promise Technology Pages: 26

Accelero TWIN TURBO II

Brand: Arctic Pages: 2

Brand: Intel Pages: 20

Brand: Cypress Semiconductor Pages: 18

Safeguard for Privileged Sessions 3000

Brand: One Identity Pages: 37

Brand: Mobile Devices Pages: 12

Emulation Probe M306V8T-EPB

Brand: Renesas Pages: 90

RGB 460xi FSR Series

Brand: Extron electronics Pages: 9

UC-CAM-UPGRD-300

Brand: Crestron Pages: 2

Brand: WEG Pages: 21

Brand: Omron Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands