Acrosser Technology AR-B1380 User Manual Download | Manualshive

Page: 5 / 79

background image

AR-B1380/AR-B1380A User’ s Guide

Page 3

0. PREFACE

0.1 COPYRIGHT NOTICE AND DISCLAIMER

November 1999
Acrosser Technology makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Acrosser Technology reserves the right to revise this publication and to make changes from
time to time in the contents hereof without obligation of Acrosser Technology to notify any person of such
revisions or changes.

Possession, use, or copying of the software described in this publication is authorized only pursuant to a
valid written license from Acrosser or an authorized sublicensor.

(C) Copyright Acrosser Technology Co., Ltd., 1999. All rights Reserved.
Acrosser, ALI, AMI, PC/AT, WIN31, WIN 95, Windows NT, NEC, HITACHI, ORION, SHARP, FUJITSU, SONY,
AKM, INTEL, MITSUBISHI, NS, SGS-THOMSON, TI, TOSHIBA, AMD …are registered trademarks.
All other trademarks and registered trademarks are the property of their respective holders.
This document is produced with Adobe Acrobat 3.01.

0.2 WELCOME TO THE AR-B1380/1380A CPU BOARD

This guide introduces the Acrosser AR-B1380/1380A CPU card’ s functions, features, and how to start, set up
and operate your AR-B1380/1380A. You can also find general system information here.

0.3 BEFORE YOU USE THIS GUIDE

If you have not already installed this AR-B1380/1380A, refer to Chapter 3, “ Setting up the System” in this
guide. Check the packing list, make sure all the accessories are included in the package.
The AR-B1380/1380A diskette provides the newest information about the card

. Please refer to the

README.DOC file of the enclosed utility diskette

. It contains the modification and hardware & software

information, and it has updates to product functions that may not be mentioned here.

0.4 RETURNING YOUR BOARD FOR SERVICE

If your board requires servicing, contact the dealer from whom you purchased the product for service
information. If you need to ship your board to us for service, be sure it is packed in a protective carton. We
recommend that you keep the original shipping container for this purpose.

You can help assure efficient servicing of your product by following these guidelines:

1) Include your name, address, telephone, facsimile number and e-mail where you may be

reached.

2) A description of the system configuration and/or software at the time of malfunction.

3) A brief description of the symptoms.

«
...
3
4
5
6
7
...
»

Summary of Contents for AR-B1380
















































































Reviews:

No comments

Related manuals for AR-B1380

Brand: Garmin Pages: 2

Brand: Grundig Pages: 24

4 Channel Input Buffer Board SDAIBB

Brand: B&B Electronics Pages: 22

JetStor NAS 724UX

Brand: AC&NC Pages: 117

Brand: PairGain Pages: 48

Brand: Idis Pages: 40

Brand: ST Pages: 64

Brand: Airaya Pages: 28

Brand: TQ Pages: 2

Brand: RTI Pages: 4

Brand: Barco Pages: 2

Brand: Sandberg Pages: 9

Brand: Velleman Pages: 10

PG-FLEXPLUS PLL-735

Brand: ADC Pages: 78

HiGain H2TU-C-319 List 4E

Brand: ADC Pages: 7

Brand: ADC Pages: 7

Brand: ADC Pages: 74

Brand: F5 Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands