Acrosser Technology AR-B1380 User Manual Download

Page: 66 / 79

AR-B1380/AR-1380A User’ s Guide

Page 64

PS/2 Mouse Support

The setting of

Enabled

allows the system to detect a PS/2 mouse on bootup. If detected, IRQ12 will be used for the

PS/2 mouse. IRQ 12 will be reserved for expansion cards and therefore the PS/2 mouse will not function.

Available options: Disabled, Enabled

Typematic Rate

This item specifies the speed at which a keyboard keystroke is repeated.

Available options: Fast ,Slow

System Keyboard

This function specifies that a keyboard is attached to the computer.

Available options: Absent, Present

Primary Display

The option is used to set the type of video display card installed in the system.

Available options: Absent, VGA/EGA, CGA40x25, CGA80x25

Password Check

This option enables password checking every time the computer is powered on or every time the BIOS
Setup is executed. If

Always

is chosen, a user password prompt appears every time the computer is

turned on. If

Setup

is chosen, the password prompt appears if the BIOS executed.

Available options: Setup, Always

Wait for ‘ F1’ If Error

AMIBIOS POST error messages are followed by:

Press <F1> to continue

If this option is set to

Disabled

, the AMIBIOS does not wait for you to press the <F1> key after an error

message.

Available options: Disabled, Enabled

Hit ‘ DEL’ Message Display

Set this option to

Disabled

to prevent the message as follows:

Hit ‘DEL’ if you want to run setup

It will prevent the message from appearing on the first BIOS screen when the computer boots.

Available options: Disabled, Enabled

C000, 32K Shadow

C800, 32K Shadow

D000, 32K Shadow

D800, 32K Shadow

E000, 32K Shadow

E800, 32K Shadow

These options control the location of the contents of the 32KB of ROM beginning at the specified memory
location. If no adapter ROM is using the named ROM area, this area is made available to the local bus.

Summary of Contents for AR-B1380
















































































Search results

Summary of Contents for AR-B1380

Reviews:

Related manuals for AR-B1380

Brands by name

Popular brands

Acrosser Technology AR-B1380, User Manual

Search results

Summary of Contents for AR-B1380

Reviews:

Related manuals for AR-B1380

Brands by name

Popular brands