Acrosser Technology AR-B1380 User Manual Download | Manualshive

Page: 7 / 79

background image

AR-B1380/AR-B1380A User’ s Guide

Page 5

1. OVERVIEW

This chapter provides an overview of your system features and capabilities. The following topics are
covered:

l

Introduction

l

Packing List

l

Features

1.1 INTRODUCTION

The AR-B1380/AR-B1380A is a new generation half size, 386 ISA interface card. This card offers much greater
performance than the older cards such as support for 20MB DRAM using one 72-pin SIMM bank, 42 pin two SOJ
one RS-232C/485 connector and one RS-232C port and 3MB/1.5MB/1.5MB solid state disk capacity for EPROM,
FLASH and SRAM.

The 6 layer PCB CPU board is equipped with an IDE HDD interface, a floppy disk interface, 1 parallel port, and 2
serial ports and a watchdog timer. It provides 2 bus interfaces, ISA bus and a PC/104 compatible expansion bus.
Based on the PC/104 expansion bus, you could easily install numerous PC/104 modules. This 386 CPU card is
excellent for embedded systems, MMI’ s, work stations, medical applications or POS/POI systems. As well, an RS-
232C/485 port is provided for remote control capabilities. RS-485 has not been offered until recently on 386 cards.

A watchdog timer, which has a software programmable time-out interval, is also provided on this CPU card. It
ensures that the system does not hang up if a program can not execute normally.

For diskless application, the AR-B1380/AR-B1380A provides up to 3 MB of bootable EPROM, FLASH, or SRAM
disk by using 64Kx8 to 1Mx8 memory chips.

The AR-B1380A has VGA and LAN onboard, and offers the most exciting possibilities yet to the industry. The
onboard VGA/LCD controller brings about a whole new dimension of industrial computing. No longer do you have
to worry about adding an extra card to your system. Space is saved by eliminating the need for a separate VGA
card. The VGA/LCD unit comes with 1MB of V-RAM on board and uses the C&T 65545 Chipset, to support a wide
range of LCD Panels.

1.2 PACKING LIST

These accessories are included with the system. Before you begin installing your AR-B1380/AR-B1380A
CPU board, take a moment to make sure that the following items have been included inside the AR-
B1380/AR-B1380A package.

For the AR-B1380 package, it includes

AR-B1380 Accessories

Description

1 Quick setup guide

Introduction of the hardware features of AR-B1380

1 AR-B1380 ISA interface CPU board

Well protected in the anti-static bag.

1 Keyboard adapter cable

PS/2 to IBM standard type adapt cable.

1 Hard diskette drive cable

2.54 mm 40 pin IDC type cable

1 Floppy disk drive interface cable

34 pin IDC type cable

1 Parallel port interface cable

26 pin Mini-IDC to DB-25 female

1 RS-232C interface cable + PS/2 Mouse

10 pin IDC to DB-9 male + PS2 Mouse

1 Utility diskette

Manual file in PDF format & S.S.D. utility

Table 1-1 AR-B1380 Packing List

«
...
5
6
7
8
9
...
»

Summary of Contents for AR-B1380
















































































Reviews:

No comments

Related manuals for AR-B1380

Brand: Teagle Pages: 40

ILDA Gem Laser projector tool

Brand: Stanwax Laser Pages: 3

Brand: Idis Pages: 31

eBOX532-100-FL Series

Brand: AXIOMTEK Pages: 2

Brand: Lanner Pages: 63

Brand: XNET Pages: 17

Aquaduct 360 XT

Brand: Aqua Computer Pages: 28

ELC-LTTR240-TBP

Brand: ENERMAX Pages: 16

Brand: IEI Technology Pages: 3

Brand: Eneo Pages: 68

UniFi Cloud Key

Brand: Ubiquiti Pages: 13

Brand: ZALMAN Pages: 7

Brand: XJTAG Pages: 9

Brand: Xilinx Pages: 8

Brand: Isee Pages: 68

Brand: ZALMAN Pages: 9

Brand: ADC Pages: 29

X-NUCLEO-AMICAM1

Brand: ST Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands