328
Copyright © Acronis, Inc., 2000-2010
Specifies how to clean up the centralized event log stored in the management server's reporting
database.
This parameter has the following settings:
Max Size
Description:
Specifies the maximum size of the centralized event log, in kilobytes.
Possible values:
Any integer number between
0
and
2147483647
Default value:
1048576
(that is, 1 GB)
Percentage to Keep
Description:
Specifies the percentage of the maximum log size to keep on cleanup
Possible values:
Any integer number between
0
and
100
Default value:
95
For details on how the centralized event log is cleaned up, see Log cleanup rules (p. 88).
Windows Event Log
Specifies when to record Acronis Backup & Recovery 10 Management Server's events into the
Application event log in Windows.
This parameter has two settings:
Trace State
Description:
Specifies whether to record Acronis Backup & Recovery 10 Management Server's
events into the event log.
Possible values: True
or
False
Default value:
False
Trace Level
Description:
Specifies the minimum level of severity of events to be recorded into the event
log. Only events of levels greater than or equal to the value in
Trace Level
will be recorded.
Possible values: 0
(Internal event),
1
(Debugging information),
2
(Information),
3
(Warning),
4
(Error), or
5
(Critical error)
Default value:
4
(only errors and critical errors will be recorded—if
Trace State
is set to
True
)
SNMP
Specifies the types of the management server's events to send notifications about by means of
Simple Network Management Protocol (SNMP).
This parameter contains the following settings:
Trace State
Description:
Specifies whether to send the SNMP notifications.
Possible values: True
or
False
Default value:
False
Trace Level
Description:
Specifies the minimum level of severity of events for sending SNMP notifications
about them. Only notifications about events of levels greater than or equal to
Trace Level
will be sent.
Possible values: 0
(Internal event),
1
(Debugging information),
2
(Information),
3
(Warning),
4
(Error), or
5
(Critical error)
Default value:
4
(only errors and critical errors will be sent—if
Trace State
is set to
True
)
SNMP Address
