Copyright © Acronis, Inc., 2000-2010
271
Basic to dynamic conversion of the disk, comprising of system volumes, takes a certain amount of time, and any
power loss, unintentional turning off of the machine or accidental pressing of the Reset button during the
procedure could result in bootability loss.
In contrast to Windows Disk Manager the program ensures bootability of an
offline operating
system
on the disk after the operation.
6.11.5.6
Disk conversion: dynamic to basic
You would want to convert dynamic disks back to basic ones, e.g. if you want to start using an OS on
your machine that does not support dynamic disks.
If you need to convert a dynamic disk to basic:
1.
Select the dynamic disk to convert to basic.
2.
Right-click on the selected volume, and then click
Convert to basic
in the context menu. You will
receive a final warning about the dynamic disk being converted to basic.
You will be advised about the changes that will happen to the system if the chosen disk is
converted from dynamic into basic. E.g. if such a conversion will stop the disk from being
accessed by the system, the operating system will stop loading after such conversion, or if the
disk you want to convert to basic contains any volumes of the types that are only supported by
dynamic disks (all volume types except Simple volumes), then you will be warned here about the
possible damage to the data involved in the conversion.
Please note, the operation is unavailable for a dynamic disk containing Spanned, Striped, or RAID-5
volumes.
3.
If you click
OK
in this warning window, the conversion will be performed immediately.
After the conversion the last 8Mb of disk space is reserved for the future conversion of the disk from
basic to dynamic.
In some cases the possible unallocated space and the proposed maximum volume size might differ
(e.g. when the size of one mirror establishes the size of the other mirror, or the last 8Mb of disk
space are reserved for the future conversion of the disk from basic to dynamic).
System disk conversion
Acronis Disk Director Lite does not require an operating system reboot after dynamic to basic
conversion of the disk, if:
1.
There is a single Windows 2008/Vista operating system installed on the disk.
2.
The machine runs this operating system.
Dynamic to basic conversion of the disk, comprising of system volumes, takes a certain amount of time, and any
power loss, unintentional turning off of the machine or accidental pressing of the Reset button during the
procedure could result in bootability loss.
In contrast to Windows Disk Manager the program ensures:
safe conversion of a dynamic disk to basic when it contains volumes
with data
for simple and
mirrored volumes
in multiboot systems, bootability of a system that was
offline
during the operation
