dynamic disks (all volume types except Simple volumes), then you will be warned here about the
possible damage to the data involved in the conversion.
Please note, the operation is unavailable for a dynamic disk containing Spanned, Striped, or RAID-5
volumes.
3.
If you click
OK
in this warning window, the conversion will be performed immediately.
After the conversion the last 8Mb of disk space is reserved for the future conversion of the disk from
basic to dynamic.
In some cases the possible unallocated space and the proposed maximum volume size might differ
(e.g. when the size of one mirror establishes the size of the other mirror, or the last 8Mb of disk
space are reserved for the future conversion of the disk from basic to dynamic).
System disk conversion
Acronis Disk Director Lite does not require an operating system reboot after dynamic to basic
conversion of the disk, if:
1.
There is a single Windows 2008/Vista operating system installed on the disk.
2.
The machine runs this operating system.
Dynamic to basic conversion of the disk, comprising of system volumes, takes a certain amount of time, and any
power loss, unintentional turning off of the machine or accidental pressing of the Reset button during the
procedure could result in bootability loss.
In contrast to Windows Disk Manager the program ensures:
safe conversion of a dynamic disk to basic when it contains volumes
with data
for simple and
mirrored volumes
in multiboot systems, bootability of a system that was
offline
during the operation
5.9.6.7
Changing disk status
Changing disk status is effective for Windows Vista SP1, Windows Server 2008, Windows 7 operating
systems and applies to the current disk layout (p. 108).
One of the following disk statuses always appears in the graphical view of the disk next to the disk's
name:
Online
The online status means that a disk is accessible in the read-write mode. This is the normal disk
status. If you need a disk to be accessible in the read-only mode, select the disk and then change
its status to offline by selecting
Change disk status to offline
from the
Operations
menu.
Offline
The offline status means that a disk is accessible in the read-only mode. To bring the selected
offline disk back to online, select
Change disk status to online
from the
Operations
menu.
If the disk has the offline status and the disk's name is
Missing
, this means that the disk cannot
be located or identified by the operating system. It may be corrupted, disconnected, or powered
off. For information on how to bring a disk that is offline and missing back online, please refer to
the following Microsoft knowledge base article:
http://technet.microsoft.com/en-
us/library/cc732026.aspx
.
Summary of Contents for Backup & Recovery Server OEM
Page 1: ...User s Guide...
