The program will access the source data using the credentials you specify. Use this option if the plan
account does not have access permissions to the location. You might need to provide special
credentials for a network share.
Specify:
User name
. When entering the name of an Active Directory user account, be sure to also
specify the domain name (DOMAIN\Username or Username@domain)
Password
. The password for the account.
Click
OK
.
Warning: According to the original FTP specification, credentials required for access to FTP servers are
transferred through a network as plaintext. This means that the user name and password can be intercepted by
an eavesdropper using a packet sniffer.
5.3.6
Destination selection
Specify the destination the selected data will be recovered to.
5.3.6.1
Disks
Available disk destinations depend on the agents operating on the machine.
Recover to:
Physical machine
Available when the Acronis Backup & Recovery Server OEM Agent for Windows is installed.
The selected disks will be recovered to the physical disks of the machine the console is
connected to. On selecting this, you proceed to the regular disk mapping procedure
described below.
Disk #:
Disk # (MODEL)
(p. 87)
Select the destination disk for each of the source disks.
NT signature
Select the way the recovered disk's signature will be handled. The disk signature is used by
Windows and the Linux kernel version 2.6 and later.
Disk destination
To specify a destination disk:
1.
Select a disk where you want the selected disk to recover to. The destination disk's space should
be at least the same size as the uncompressed image data.
2.
Click
OK
.
All the data stored on the target disk will be replaced by the backed up data, so be careful and watch out for
non-backed-up data that you might need.
NT signature
When the MBR is selected along with the disk backup, you need to retain operating system
bootability on the target disk volume. The operating system must have the system volume
information (e.g. volume letter) matched with the disk NT signature, which is kept in the MBR disk
record. But two disks with the same NT signature cannot work properly under one operating system.
Summary of Contents for Backup & Recovery Server OEM
Page 1: ...User s Guide...
