3.
Click
OK
.
5.5.3
Access credentials
To specify credentials
1.
Select one of the following:
Use the current user credentials
The program will access the location using the credentials of the current user.
Use the following credentials
The program will access the location using the credentials you specify. Use this option if the
current user account does not have access permissions to the location. You might need to
provide special credentials for a network share.
Specify:
User name
. When entering the name of an Active Directory user account, be sure to also
specify the domain name (DOMAIN\Username or Username@domain)
Password
. The password for the account.
Click
OK
.
Warning: According to the original FTP specification, credentials required for access to FTP servers are
transferred through a network as plaintext. This means that the user name and password can be intercepted by
an eavesdropper using a packet sniffer.
5.5.4
Volume selection
Select the volumes to mount and configure the mounting parameters for each of the selected
volumes as follows:
1.
Select the check box for each volume you need to mount.
2.
Click on the selected volume to set its mounting parameters.
Access mode
- choose the mode you want the volume to be mounted in:
Read only
- enables exploring and opening files within the backup without committing
any changes.
Assign letter
(in Windows) - Acronis Backup & Recovery Server OEM will assign an unused
letter to the mounted volume. If required, select another letter to assign from the drop-
down list.
3.
If several volumes are selected for mounting, click on every volume to set its mounting
parameters, described in the previous step.
4.
Click
OK
.
5.6
Managing mounted images
Once a volume is mounted, you can browse files and folders contained in the backup using a file
manager and copy the desired files to any destination. Thus, if you need to take out only a few files
and folders from a volume backup, you do not have to perform the recovery procedure.
Exploring images
Exploring mounted volumes lets you view the volume's content.
Summary of Contents for Backup & Recovery Server OEM
Page 1: ...User s Guide...
