257
Copyright © Acronis, Inc., 2000-2010
to get the mass-storage drivers that you explicitly specify from the media. This is necessary when
the target hardware has a specific mass storage controller (such as a SCSI, RAID, or Fiber Channel
adapter) for the hard disk.
For more information please refer to Universal Restore (p. 225).
The drivers will be placed in the visible Drivers folder on the bootable media. The drivers are not
loaded into the target machine RAM, therefore, the media must stay inserted or connected
throughout the Universal Restore operation.
Adding drivers to bootable media is available on the condition that:
1.
The Acronis Backup & Recovery 10 Universal Restore add-on is installed on the machine where
the bootable media is created AND
2.
You are creating a removable media or its ISO or detachable media, such as a flash drive. Drivers
cannot be uploaded on a PXE server or WDS/RIS.
The drivers can be added to the list only in groups, by adding the INF files or folders containing such
files. Selecting individual drivers from the INF files is not possible, but the media builder shows the
file content for your information.
To add drivers:
1.
Click
Add
and browse to the INF file or a folder that contains INF files.
2.
Select the INF file or the folder.
3.
Click
OK
.
The drivers can be removed from the list only in groups, by removing INF files.
To remove drivers:
1.
Select the INF file.
2.
Click
Remove
.
6.10.1.2
Adding the Acronis Plug-in to WinPE 1.x
Acronis Plug-in for WinPE can be added to:
Windows PE 2004 (1.5) (Windows XP Professional with Service Pack 2)
Windows PE 2005 (1.6) (Windows Server 2003 with Service Pack 1).
To add Acronis Plug-in to WinPE 1.x:
1.
Unpack all files of your WinPE 1.x ISO to a separate folder on the hard disk.
2.
Start the Bootable Media Builder either from the management console, by selecting
Tools >
Create Bootable Media
or, as a separate component.
3.
Select
Bootable media type:
Windows PE
.
Select
Use WinPE files located in the folder I specify
4.
Specify path to the folder where the WinPE files are located.
5.
Specify network settings (p. 255) for the machine network adapters or choose DHCP auto
configuration.
6.
Specify the full path to the resulting ISO file including the file name.
7.
Check your settings in the summary screen and click
Proceed
.
8.
Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into the WinPE, Acronis Backup & Recovery 10 starts automatically.
