244
Copyright © Acronis, Inc., 2000-2010
If the archive is stored on an
FTP
or
SFTP
server, type the server name or address in the
Path
field as follows:
ftp://ftp_server:port _number or sftp://sftp_server:port number
If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.
After entering access credentials, the folders on the server become available. Click the
appropriate folder on the server.
You can access the server as an anonymous user if the server enables such access. To do so,
click
Use anonymous access
instead of entering credentials.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
If the archive is stored on a locally attached tape device, expand the
Tape drives
group, then
click the required device.
For the management server: in the folders tree, select the managed vault.
2.
In the table to the right of the tree, select the archive. The table displays the names of the
archives contained in each vault/folder you select. If the archive is password-protected, provide
the password.
While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the
Refresh
button
to refresh the list of archives.
3.
Click
OK
.
6.7.3
Backup selection
To specify a backup(s) to export
1.
At the top of the window, select the respective check box(es).
To ensure that you choose the right backup, click on the backup and look at the bottom table
that displays the volumes contained in the selected backup.
To obtain information on a volume, right-click it and then select
Information
.
2.
Click
OK
.
6.7.4
Access credentials for source
Specify credentials required for access to the location where the source archive (or the backup) is
stored.
To specify credentials
1.
Select one of the following:
Use the task credentials
The program will access the location using the credentials of the task account specified in the
General section.
Use the following credentials
The program will access the location using the credentials you specify. Use this option if the
task account does not have access permissions to the location. You might need to provide
special credentials for a network share or a storage node vault.
Specify:
