ACOEM Met One Instruments GAS-1060, User Manual

Page: 30 / 164

Serinus 60 User Manual 3.0
Page 30
Items Received
With the delivery of the Serinus 60, the user should have received the following:

Ecotech Serinus 60 Analyser PN: E020060

Green Ecotech Resources USB Stick PN: H030137-01

Manual PN: M010060 (hardcopy optional)

USB Memory Stick PN: H030021

USB Cable PN: COM-1440

Power Lead (120V)* USA PN: C040007

Power Lead (240V)* Australia PN: C040009
Europe PN: C040008
UK PN: C040010
*The power lead received depends on the mains supply of the country (120V or 240V).
Note: Check all these items have been delivered undamaged. If any item appears damaged, please
contact your supplier before turning the instrument on.
2.2 Installation Notes
When installing the instrument the following points must be taken into account:

The instrument should be placed in an environment with minimal dust, moisture and variation in
temperature (20-30 °C for U.S. EPA designated range).

For best results the instrument should be located in a temperature and humidity controlled
environment (air conditioned shelter). An enclosure temperature of 25-27 °C is optimum.

Whether in a rack or placed on a bench, the instrument should not have anything placed on top
of it or touching the case.

Instruments should be sited with easy access to the front panel (instrument screen/USB memory
stick) and to the back panel (communication ports/pneumatic connections).

It is recommended that the sample line be as short as possible and/or a heated manifold be used
for sampling (minimising moisture condensation in the sample).

Do not pressurize the sample line under any circumstances. Sample should be drawn through the
instrument under atmospheric pressure. This should be achieved by using an external vacuum
pump connected to the exhaust port of the instrument.

When supplying span gas, ensure the flow is approximately 1 slpm and excess is sufficiently
vented.
Note: The power on/off switch is accessible from the rear of the instrument only. Install the
instrument so that the on/off power switch is accessible.