ACOEM Met One Instruments GAS-1060, User Manual

Page: 126 / 164

Serinus 60 User Manual 3.0
Page 126
8.2.2 Pressure Calibration
Refer to Section 5.3
8.2.3 Pump control
This section describes how to turn off and on the internal pump for servicing and maintenance
purposes.
Procedure
1. Open - Main Menu

Service Menu

Diagnostics Menu

Internal Pump Menu .
2. Select - Flow Control

Manual .
3. Toggle Off - Internal Pump

Off .
8.3 Rack Mount Kit (PN: E020116)
The rack mount kit is necessary for installing the Serinus into a 19” rack (the Serinus is 4RU in height).
Table 8 – Included Parts (Rack Mount Kit)
Parts Removed Quantity Part Numbers
Rack Slide Set 1 H010112
Rack Mount Adaptors 4 H010133
Rack Mount Ears 2 H010134
Spacers 4 HAR-8700
M6 x 20 Button Head Screws 8
M6 Washers 16
M6 Nyloc Nuts 8
M4 x 10 Button Head Screws 18
M4 Washers 8
M4 Nyloc Nuts 8
M6 Cage Nuts 8
Installing the Instrument
1. Remove the rubber feet from the instrument (if attached).
2. Separate the slide rail assembly by pressing the black plastic clips in the slide rails to remove the
inner section of the rail (refer to Figure 67).