ACOEM Met One Instruments GAS-1060, User Manual

Page: 145 / 164

Parts List Page 145
15 CO Measure Pot Not Used
16 High Volt Adjust Pot PMT High Voltage Adjust Pot for S50 & S40
17 SO2 Lamp Adjust Pot S50 Lamp adjustment Pot
18 O3 Lamp Adjust Pot S10 Lamp adjustment Pot
19 O3 Meas. Zero Pot (C) S10 Signal zero measure (coarse)
20 O3 Meas. Zero Pot (F) S10 Signal zero measure (fine)
21 PMT Fan Pot Optical Bench fan speed control pot
22 Rear Fan Pot Chassis Fan speed control pot
23 Pump Fine Pot Internal Pump speed fine pot
24 Pump Coarse Pot Internal Pump speed coarse pot
25 Analog input 0 SO2 Reference signal
26 Analog input 1 CO Reference signal
27 Analog input 2 O3 Reference signal
28 Analog input 3 SO2 & O3 Lamp current
29 Analog input 4 Flow block pressure
30 Analog input 5 Cell pressure
31 Analog input 6 Ambient pressure
32 Analog input 7 Raw ADC calibration input
33 Analog input 8 Reserved
34 Analog input 9 Concentration data
35 Analog input 10 Reserved
36 Analog input 11 Reserved
37 Analog input 12 Raw analog to digital count for external analog
input 0. 0-5V= 0-32766 A/D counts
38 Analog input 13 Raw analog to digital count for external analog
input 1. 0-5V= 0-32766 A/D counts
39 Analog input 14 Raw analog to digital count for external analog
input 2. 0-5V= 0-32766 A/D counts
40 Analog input 15 Reserved
41 CO Meas. Zero Pot (coarse) S30 Measure ZERO coarse adjustment Pot
42 CO Meas. Zero Pot (fine) S30 Measure ZERO fine adjustment Pot
43 SO2 Input Pot SO2 Measure Signal Gain Pot
44 SO2 Ref. Gain Pot SO2 Reference Signal Gain Pot
45 SO2 Meas. Zero Pot SO2 Measure zero pot
46 O3 Input Pot O3 Input signal gain pot