ACOEM Met One Instruments GAS-1060, User Manual

Page: 114 / 164

Serinus 60 User Manual 3.0
Page 114
6.4.3 Updating Firmware
It is important for optimal performance of the instrument that the latest firmware is loaded. The
latest firmware can be obtained by visiting Ecotech’s website:
http://www.ecotech.com/downloads/firmware
Or by emailing Ecotech at service@ecotech.com or support@ecotech.com
To update the firmware from a USB memory stick, use the following procedure:
USB Memory Stick Update
1. Turn the instrument off.
2. Place the USB memory stick with the new firmware (ensure that firmware is placed in a folder
called FIRMWARE) in the front panel USB Port.
3. Enter the Bootloader (refer to Section 6.4).
4. Select option 3 (upgrade from USB memory stick), press 3 on the keypad.
5. Wait until the upgrade has completed.
6. Press 9 on the keypad to start the instrument with new firmware.
6.4.4 Erase All Settings
This command is only required if the instrument’s firmware has become unstable due to corrupted
settings. To execute this command enter the
Bootloader Menu (refer to Section 6.4) and press 4 on
the keypad.
6.4.5 Start Analyser
The start analyser command will simply initiate a firmware load by pressing 9 on the keypad from the
Bootloader Menu . It is generally used after a firmware upgrade.