Gen II
User Manual
11-4 – Fan Blade Mapper
Chapter 11
Revision 3.00, Apr 2020
paragraph 11.1.5.1 below. Selecting “No” will not present the Serial Number
fields.
11.1.2.9.
The
Define Max Weight Difference for Opposite Blades:
field will become
visible when an even value is entered in the
Number of Blades:
field (paragraph
11.1.2.4 above). Use the [
] key to select either “Yes” or “No”. Selecting “No”
will allow the analyzer to map the blades in an optimal configuration regardless of
weight variances. Selecting “Yes” and using the [
] key will display an additional
field allowing you to define a maximum allowable weight difference between two
opposing blades. The analyzer will map the blades in the best configuration
available but will not place blades opposite each other whose weight exceeds this
value.
11.1.2.10.
When all fields are complete, press [OK] to accept your settings and continue.
11.1.3.
– Job Identification
11.1.3.1.
The “Job Identification” screen, shown below will be displayed. Use the [
] key
to move from field to field. Use the analyzer keypad to enter a Name, and
optional Aircraft (A/C) Registration and Aircraft Total Time. If Names have
previously been entered in this analyzer, you may optionally press the [F1]
“Names” key and select a name from the stored list of names. When all fields are
complete as necessary, press [OK] to accept your settings and continue.
