Acer TravelMate 330 Series User Manual Download Page 85

Page: 85 / 146

Disconnecting from the Desktop

Follow these steps to disconnect your computer from external
accessories:

Save your work in progress.

Remove any media, diskette and compact disc, from the
EasyLink™ Combo Drive.

Shut down the operating system.

Turn off the computer.

Disconnect the EasyLink™ Combo Drive from the
computer, if necessary.

Disconnect the cord from the AC adapter.

Disconnect the keyboard, pointing device, printer, external
monitor, and other external devices.

Disconnect the Kensington lock if you are using one to
secure the computer.

330.book Page 65 Friday, March 5, 1999 11:08 AM

Summary of Contents for TravelMate 330 Series



















































































































































Search results

Summary of Contents for TravelMate 330 Series

Reviews:

Related manuals for TravelMate 330 Series

Brands by name

Popular brands

Acer TravelMate 330 Series, User Manual

Search results

Summary of Contents for TravelMate 330 Series

Reviews:

Related manuals for TravelMate 330 Series

Brands by name

Popular brands