Acer Altos R920 Series, User Manual

Page: 140 / 206

4 System BIOS 122
Changing a system password
1 Use the up/down keys to highlight either change password
parameters (Set Administrator Password or Set User Password)
then press
Enter .
2 Type the original password then press Enter .
3 Type a new password then press Enter .
4 Retype the password to verify the first entry then press Enter
again.
Removing an administrator password
Note: Removing the administrator password also removes the
user password.
1 Use the up/down keys to highlight the Set Administrator Password
parameter then press
Enter .
2 Enter the current password then press Enter .
3 Press Enter twice without entering anything in the new and
confirm password fields.
After doing this, the system automatically sets the User password
parameter to
Not Installed .