Installation and Operation Manual
Chapter
1 Introduction
ACE-3105, ACE-3205 Ver. 5.2
Functional Description
1-13
Abis optimization is supported for up to 6 E1 ports in ACE-3205 and up to 4 E1
ports in ACE-3105. Abis is not available for T1 ports.
The E1 interfaces are available with balanced or unbalanced connectors (via an
optional RJ-45 to BNC adapter cable).
For detailed specifications and compliance of the E1/T1 interfaces, see
on page
. For the connector pinouts, see
Appendix A
.
Fast Ethernet Interface
ACE-3105, ACE-3205 includes two Fast Ethernet (10/100BaseT) ports, used for
pseudowire (PW) connectivity, user connections and inband management access.
The Ethernet ports are also used for out-of-band management in applications
that do not utilize an Ethernet uplink.
The Ethernet interfaces of ACE-3205 can be ordered as electrical (RJ-45) or fiber
optic ports. The fiber optic ports utilize hot-swappable Ethernet-compliant SFPs.
For the electrical connector pinouts, see
RS-232/V.24 Terminal Control Interface
An RS-232/V.24 DCE interface with a D-Type, 9-pin connector is available in
ACE-3105, ACE-3205 for out-of-band ASCII terminal access. The interface
supports 9.6, 19.2, 38.4, 57.6, and 115.2 kbps data rates.
For more information about the terminal connection, refer to
. For the
connector pinout, refer to
Traffic Aggregation over DSL
ACE-3105, ACE-3205 aggregates all ATM, TDM, Ethernet and management traffic
over SHDSL and ADSL2+ links. The following figure illustrates this multiservice
aggregation functionality:
Figure
1-10. Multiservice Traffic Aggregation over xDSL
Note
