AccuEnergy Acuvim II, User Manual

Page: 166 / 280

158
c. “Mail Settings” Webpage
Figure 5-46: “Mail Settings” webpage. Users can choose between 4 mail sending
modes: "Triggerd Sending", "Timed Sending", both "Triggered and Timed
Sending" and "None". Boxes marked with "*" cannot be left blank. "Triggered
Sending" means users will receive mail when the meter detects a new event,
such as an "Alarm Event" or "SOE Event". "Timed Sending" means users can
receive mail every 5~1440 minutes (user settable) reporting "Metering",
"Energy", "Harmonics", "Sequence", "Max/Min", "Alarm Record" and "SOE Record".
Sending Modes can be set as follows:
Setting"Triggered Sending" mode: users can select one or all of the checkboxes
below. Triggered Sending includes "Alarm Event" and "SOE Event" as seen in
Figure 5-46. Triggered Sending mode is disabled if neither "Alarm Event" or "SOE
Event" is selected.
Setting"Timed Sending" mode: users enter a number between 5 and 1440
minutes into the box beside "Timed Sending". This number is the interval time
between mail. Sending mode is disabled if 0 is entered. Users can also select
which parameters to receive reports on by checking the checkboxes below
"Timed Sending" in Figure 5-46.Setting both "Triggered Sending" and "Timed
Sending" mode: users follow the steps for both "Triggered Sending" and "Timed
Sending" above.
"None" mode: users disable both "Triggered Sending" and "Timed Sending"
modes.
Note: Mail Server part includes "SMTP Server", "User Name" and "Password".
For the "SMTP Server" users can input either domain name such as "mail.
accuenergy.com" or an IP address such as "222.128.6.73" which is from "mail.
accuenergy.com" resolved. A user name and password will be required to log in.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com