AccuEnergy Acuvim II, User Manual

Page: 45 / 280

37
c) Phase Angles and Unbalance
:
Press H to display phase angles and unbalance data. The screen will roll to the
next page when H is pressed again. It will go back to the first screen if you press
H at the last screen.
The following figure shows the sequence:
When using "2LL" or "3LL" wiring setting mode, voltage stands for line to line
voltage. Otherwise, voltage stands for line-to-neutral voltage.
d) Energy:
Press E key to display energy and real time clock. The screen will roll to the next
page when E is pressed again. It will go back to the first screen if you press E at
the last screen.
Acuvim II series meter can be set to record primary energy or secondary
energy.The unit of energy is kWh for active energy, kvarh for reactive energy
and kVAh for apparent energy. The running time has a resolution of 0.01h.
The meter begins accumulating time upon initial powering up of the unit. The
accumulated time is stored in the non-volatile memory. It can be reset via
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com