AccuEnergy Acuvim II, User Manual

Page: 64 / 280

56
DI of AXM-IO2 can be used as the pulse counter, each DI function
corresponds to one bit of a 4-bit register. The correspondence bit
of 0 means that the DI works as the digital status input and the
correspondence bit of 1 means that the DI works as the pulse counter. For
example, if the setting value is 0001, it means that DI1 is set as the pulse
counter and other DIs work as digital status inputs.
If the DI works as a pulse counter, when the number of pulses counted
by the DI equals to the pulse constant, the pulse counter will increase
by one. This means that the actual pulse number equals the number of
pulses counted multiplied by the pulse constant.
DO of AXM-IO1 can be used as either alarm output or energy pulse
output. ALM: alarm output; PUL: energy pulse output
Range from 20-1000 ms.
Choose output energy type for DO1. Range from 0-4. 0: no output; 1:
import active energy; 2: export active power; 3: import reactive energy; 4:
export reactive energy.
Follow the DO1 setup method to setup DO2.
If DO type is set as alarm output, DO1 and DO2 output type parameters
will have no effect.
Range from 0 to 3, 0: 0-20mA; 1: 4~20mA; 2: 0-5V; 3: 1-5V.
Be aware that modules with current option cannot be set as voltage type
(i.e. option 2 and 3 are unavailable); modules with voltage option cannot
be set as current type (i.e. option 0 and 1 are unavailable).
For AO1 and AO2 transforming parameter:
Range: 0~29, see Chapter 5 page 99 "AO transforming parameter settings"
for more details.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com