AccuEnergy Acuvim II, User Manual

Page: 52 / 280

44
Note: The figure shows the rolling sequence when pressing P. If E is pressed,
the sequence will reverse.
3.6 Expanded I/O Module Data
Pressing H and V/A simultaneously will activate the display mode selection and
the cursor will flash. Press P or E to move the cursor right or left. To access data
from the expanded I/O modules, move the cursor to "Digital I/O" then press V/A
to enter the expanded I/O module data mode.
In the expanded I/O module data mode, the meter displays the data from
expanded I/O modules, such as DI status, pulse counter number, relay status,
analog input, and analog output etc.
In this mode, the first page is module selection. You can choose to view the
available modules that are attached to the meter. If no expanded I/O modules
are connected, the screen will display "NO IO".
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com