15
Loss of flame for 6 consecutive times in request for heat
Button anomalies
OT communication error
SGV opening time without flame error
Richiesta calibrazione GAS
Fume exhaust anomaly
Heating NTC probe failure (ΔT error)
Failure of the SGV management circuit
SGV opening problem
Block due to combustion anomaly at start-up (2)
Problem on the SGV circuit
Loss of flame upon ignition for more than 6 consecutive times
Software Error. Card not configured
Generic block
Table 4 - BOILER STATUS - LCD display in case of malfunction
(1) This control is activated after 120 seconds from the activation of the pump and only during the CH request (without domestic hot water).
(2) Anomaly 81 may be caused by an obstruction of the smoke exhaust duct. In this case it is advisable to contact the service center
before unblocking the boiler.
