p-40-ed-2-en
10.2
04-03-08
f)
The position can again be corrected.
When no further correction is needed, then proceed as with g) below.
g) As soon as another parameter number is called up, e.g. example 703, the previously
programmed value of <702> is memorized.
h) With parameter 703 correction is obtained as described above for parameter 702.
i)
Deactivate programming level „b“
(see section 9.1.1 and 9.1.2 „Selecting the user level „b“).
10.3
Control of the maximum speed
a)
Activate programming level „b“
(see section 9.1.1 "Selecting the user level „b“)
b)
Set to parameter 607
c)
Check the parameter value <607> and make correction if necessary via
key field 3 +/- or key field 4 +/-
at the control panel S1
d)
Deactivate programming level „b“
(see section 9.1.1 and 9.1.2 "„Selecting the user level „b“).