10.4 Hardware Test
Hardware Test is a check routine permitting to use the control panel S1
for testing various components of the drive system
(control system) and of the machine installation.
Activation of the „HARDWARE TEST“ = „HW-Test“ routine
a)
push key TE-SPEED two times
b)
to activate programming level „c“ set parameter <798> to 11
(see section 9.1.1 and 9.1.2 „programming level „b“).
c)
at programming level „c“, call up parameter 797
d)
Set <797> from OFF to ON with key field 4
After that, the display shows the first test block: Inputs.
Response: The display shows:
Survey of test blocks:
1
Inputs
2
Outputs
3
Speed controlunit
4
Synchronizer
To call up the test blocks (advancing from test block to test block),
use key field 1
Hint: further indications on the display are for optional functions!
p-40-ed-2-en
10.3
04-03-08
E
1
0
A
1
0
S
0
I
0
key field 1
key field 4
