p-40-ed-3-en
11.5
05-10-25
11.4 List of Parameters P40ED 1_040_10
(PARAM.EN)
No.
Function (Meaning)
Level
Range
of
Standard
Values
Value
101
(BDF) Audible signal of the control panel pushbutton A,B,C
1
Kl. 1, 2, 3, 4
1 = on
0 = off
105
(AR/RIE/DRZ/MESSER/NA/SAUG/STVD) Speed for B,C
0300 - 2000 1200 Kl. 1, 3, 4
front backtack/ stitch condensation
0300 - 2000 700
Kl. 2
106
(AR/DRZ/STVD) Speed for front backtack/stitch
B,C
0
Kl. 1, 2, 3, 4
condensation
1 variable (treadle-controlled)
0 constant (corresponding to <105>)
107
(AR/RIE/DRZ/STVD) Speed for front backtack/stitch
B,C
0
Kl. 1, 2, 3, 4
condensation when <106> = I
1 limited by <105>
0 limited by <607>
110
(ER/RIE/DRZ/MESSER/NE/SAUG/STVD) Speed for B,C
0300 - 2000 1200 Kl. 1, 3, 4
end backtack/ stitch condensation
0300 - 2000 700
Kl. 2
111
(LS/STZA) Light barrier compensation stitches 1
A,B,C
0001 - 0030 8
Kl. 1, 2, 3, 4
(stitches from light barrier clear to seam end)
112
(LS/STZA) Number of stitches for light barrier fade-out
A,B,C
0000 - 0100 0 Kl. 1, 2,
3, 4
on knit fabrics (according to stitch size)
113
(LS/START) Start with light barrier
B,C
0
Kl. 1, 2, 3, 4
1 when light barrier is dark only
0 also when light barrier is clear
116
(SANL) Soft start stitches
A,B,C
0000 - 0030 0
Kl. 1, 2, 3, 4
117
(SANL/DRZ) Speed for soft start stitches
B,C
0030 - 0640 400
Kl. 1, 2, 3, 4
163
(LS) Sewing with photocell
B,C
0
Kl. 1, 2, 3, 4
1 yes
0 no
199
(DRZ/LS) Speed for light barrier compensation
B,C
0300 - 2000 1200 Kl. 1, 2, 3, 4
stitches
203
(PR/DRZ) Speed for seam program
B,C
1
Kl. 1, 2, 3, 4
1 variable (treadle-controlled)
0 constant (corresponding to <221> or <222>)
206
(NE/PR/STOP) Interrupt/discontinue seam sections
B,C
0
Kl. 1, 2, 3, 4
at speed = constant (<203> = II)
1 with treadle -2
0 with treadle 0
301
(TUM) Switch-on voltage of the magnet for transport C
0
Kl. 1, 2, 3, 4
change-over
1 24V
0 32V
311
(PR/SN) Cancellation of stitch count
B,C
1
Kl. 1, 2, 3, 4
1 with thread cutting
0 without thread cutting
313
(PR) Programs are backtack programs (darning
A,B,C
0
Kl. 1, 2, 3, 4
programs)
1 yes
0 no
356
(PF/SAUG/KS) Input E4 is at
B,C
1
Kl. 1, 2, 3, 4
1 Presser foot
0 Vacuuming
364
(RIE/STVD/TUM) Transport change-over means for
B,C
1
Kl. 1, 2, 3, 4
1 Back-tack
0 Stitch condensation
382
(FW) Switching threshold of the analogue input for theB,C
0000 - 0100 15
Kl. 1, 2, 3, 4
thread monitor
387
(ML/KS) Output Ax (motor run) is active
B,C
1
Kl. 1, 2, 3, 4
1 With Pedal = 1D (Motor running)
0 With Pedal = 1 (Lower presser foot)
