8.
Application
This EcoDrive drive can be used with the external operator’s control panel S1.
Switching on
The on/off switch (mains switch) is located under the sewing machine table. When activated and live,
an control lamp at the switch lit up.
Maximum speed
The maximum speed can be adjusted with the control panel S1.
Press the TE/Speed key once to call up the speed input mode.
Switch on the machine.
If necessary switch off the "darning seam" or "counted seam" function, see Chapter 8.3 Darning pro
gram or Chapter 8.4 Counted seam.
By pressing the corresp/- key ("A") select the desired value for the number of forward stitches (A)
of the start backtack.
By pressing the corresp/- key ("B") select the desired value for the number of reverse stitches (B)
of the start backtack.
By pressing the corresp/- key ("C") select the desired value for the number of reverse stitches (C)
of the end backtack.
By pressing the corresp/- key ("D") select the desired value for the number of forward stitches (D)
of the end backtack.
By pressing the keys start backtack
and/or end backtack
, activate the corresponding
function (arrow appears next to the corresponding function key).
8.1
Entering the start and end backtacks
A
B
C
D
SPEED
TE
ERROR
p-40-ed-2-en
8.1
04-03-08
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3