manualshive.com logo in svg

ABB SACE Emax E1.2, Operating Instructions For The Design Engineer

The ABB SACE Emax E1.2 is a cutting-edge electrical circuit breaker system designed to meet the needs of design engineers. To ensure seamless integration, we provide a comprehensive "Operating Instructions For The Design Engineer" manual for free download on our website. Visit now to access this essential resource and optimize your projects with ease.

Share
Download
background image

ABB | SACE Emax 2

220 | © 2017 ABB |  1SDH001330R0002 - ECN000058721 Rev. A

Electronic accessories | 10 - Ekip Com Modbus TCP modules

10 - Ekip Com Modbus TCP modules

Description

Ekip Com Modbus TCP is an accessory module that can function as a communication module integrating the 
circuit-breaker in an industrial remote supervision and control network or as an HTTP Server.
 
As communication module, it can be connected to an Ethernet network with Modbus TCP communication, 
and allows to:

•  Connect the trip units to the network, with dialog functionality.
•  Command opening and closing of the circuit-breaker from remote.
•  Provide information on the state of the circuit-breaker (open, closed, tripped).
•  If mounted on a circuit-breaker in withdrawable version, detect the connected/disconnected position.

For more details about how to access information and transmit commands to the trip unit via the module, 
consult chapter "System Interface" on page 155.
Remote opening and closing of the circuit-breaker can be performed only if the circuit-breaker is equipped 
with an Ekip Com Actuator module (see page 243).
 
As HTTP Server, connected to an Ethernet network, this module allows read-only access to the information 
of the trip unit. This access is possible through a browser, inserting the IP address of the module. Once the 
trip unit has been found, a login page is opened that asks for the user password to be inserted, which is the 
same password to be inserted in the display to modify the parameters.

 

 

IMPORTANT: since the module allows control of the circuit-breaker and access to 
the data contained in the trip unit, it can only be connected to networks that meet 
all the necessary requirements for security and prevention of unauthorized access 
(for example, the network of the control system of an installation). It is the installer's 
responsibility to ensure that all the necessary security measures are adopted (for 
example, firewalls, and so on). The module cannot be connected directly to the 
Internet. Connection to dedicated Ethernet networks through the Modbus TCP 
communication protocol is recommended.

 

The following table shows the ports used by the module:

Port

Service

Notes

502/tcp

Modbus TCP

When the module is used as Modbus TCP/IP communication module.

80/tcp

Server HTTP

When the module is used as Server HTTP.

319/udp

IEEE 1588

When IEEE protocol 1588 is enabled (see paragraph "Configuration", on 
page 224).

320/udp
68/udp

DHCP client

DHCP Client enabled as an alternative to “Static Address = On”

 
For applications in which a high network reliability is necessary, the module can be installed along with the 
corresponding Redundant module.
The Redundant module is identical in terms of characteristics and installation, but its wiring is different from 
the non-Redundant model.

 

IMPORTANT: on each circuit-breaker, only one Ekip Com Modbus TCP, and only one 
Ekip Com Modbus TCP Redundant can be installed.

 

IMPORTANT: when the circuit-breaker is in the disconnected position, the trip unit 
is disconnected from the module: in this condition, the only valid information 
transmitted is:

• 

Connection of trip unit to Com module (Trip unit disconnected = disconnected).

• 

CB position (CB isolated / CB connected = CB isolated).

• 

Presence of com module ( = present; only valid for the module to which it is connected).

Continued on the next page

Continued from the previous page

 

Further details are given in document 

1SDH001140r0001

 (Communication System 

Interface for Emax 2), sections Status Global 1 [dlog], Status Accessories 1 and 
Status Accessories 2.

The modules are always supplied with Ekip AUP and Ekip RTC contacts (see the chapter "16 - Other 
accessories" on page 244).

Compatibility and power supply

The modules can be installed combined with Ekip Touch, Hi-Touch, G Touch, and G Hi-Touch trip units, and 
require the presence of an Ekip Supply module in the first slot of the circuit-breaker terminal box.

Connections

The modules must be mounted on the terminal box of the circuit-breaker or of the fixed part of the withdrawable 
circuit-breaker, in the first free slot after the Ekip Supply module.
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/, in 
particular in the kit sheet 

1SDH001000r0514

.

An example with an E2.2 circuit-breaker in fixed and withdrawable versions is provided to the side.
The following is a view of the terminal box of E1.2 and E2.2/E4.2/E6.2 circuit-breakers with the relevant wiring 
diagram:

R2

R1

U2

U1

38

36

35

98

96

95

YR

M

S33

S51

YO

EKIP Supply

Trip Unit I/O

Ge-

Ge

Szc

K2

K1

W4

W3

Q4

Q3

Q2

Q1

YC

YU

YO2

RTC

I/O

TU

44

42

41

34

32

31

24

22

21

14

12

11

C12

C13

C11

C2

C3

C1

D2

D1

48

46

45

Ne

Rca

Ne-

Gzi

Szo

Szi

Gzo

Rct

Vn

V1

V2

V3

Module

Module

YO

01

H4

02

K5

04

K10

K9

94

92

H3

91

81

H2

82

K4

K8

84

74

K7

K3

H1

72

71

61

HC

62

64

54

52

51

EKIP Supply

Module

Trip Unit I/O

HC

K6

Ge-

Ge

Szc

K2

K1

W4

W3

R2

R1

Q4

Q3

Q2

Q1

YC2

YC

YU

YO2

RTC

I/O

TU

44

42

41

34

32

31

24

22

21

14

12

11

C22

C21

C12

C13

C11

C2

C3

C1

D2

D1

48

46

45

Ne

Rca

Ne-

Gzi

Szo

Szi

Gzo

Rct

Vn

V1

V2

V3

U2

U1

38

36

35

98

96

95

YR

M

S33

S51

EKIP Signalling 4K

Q5..Q10

Module

Module

HC

A4

A3

A4

52

194

XK7

XK7

1

2

193

S75I/5

W9

RJ45

BUS 1

Eki

pCo

m

Modbus

TC

P

n

COM

K51

O)

*

* L)

* L)

n

Eki

pC

om Redundan

t

Modbus TC

P

BUS 2

RJ45

W9R

62

K51

COM

R)

*

R)

*

Diagrams 52 - 62

Continued on the next page

Summary of Contents for SACE Emax E1.2
























































































































































































































































































































Reviews:

No comments

Related manuals for SACE Emax E1.2

OEZ LFN-B Series Instructions For Use Manual preview
LFN-B Series
Brand: OEZ Pages: 8
ABB SACE Emax 2 E4.2 Instruction Handbook Manual preview
SACE Emax 2 E4.2
Brand: ABB Pages: 72
Eaton XNH1-A Series Instruction Leaflet preview
XNH1-A Series
Brand: Eaton Pages: 16
L&T Electrical & Automation OMEGA Manual preview
OMEGA
Brand: L&T Electrical & Automation Pages: 135
Veethree VeeConnect ECBU User Manual preview
VeeConnect ECBU
Brand: Veethree Pages: 12
ABB SACE Tmax T4 Quick Start Manual preview
SACE Tmax T4
Brand: ABB Pages: 5
Eaton NAS63-CI-2 Instruction Leaflet preview
NAS63-CI-2
Brand: Eaton Pages: 3
Eaton MSC-D XTSE Series Instruction Leaflet preview
MSC-D XTSE Series
Brand: Eaton Pages: 2
Elenco Electronics LP-425K Assembly And Instruction Manual preview
LP-425K
Brand: Elenco Electronics Pages: 12
DINWAY BAM8 Series Instruction Manual preview
BAM8 Series
Brand: DINWAY Pages: 18
Apator ARS 00/100 Mounting And Operation Manual preview
ARS 00/100
Brand: Apator Pages: 12
Utility Relay AC-PRO Retrofit Kit Instructions Manual preview
AC-PRO Retrofit Kit
Brand: Utility Relay Pages: 44

Brands by name

Popular brands

Load more brands