A071224 V1 EN
Figure 77:
Obtaining IP address automatically
5.
Close all open windows by clicking
OK
and start PCM600.
Administrator rights are requested to change the configuration
as described above.
Setting the rear communication
To set up a standard PC with MicroSoft Windows operating system for rear
communication:
1.
To open Network Connections, click
Start
, point to
Settings
, click
Control
Panel
, and then double-click
Network Connections
.
2.
Double-click the connection that you want to configure, and then click
Properties
.
3.
Select the TCP/IP protocol from the list of configured components using this
connection and click
Properties
.
1MRS756708 C
Section 8
Commissioning
615 series
101
Operation Manual
