Only authorized and skilled personnel should analyze the errors and
decide on further actions.
The IED records system registrations, IED status data and events.
Document all the recorded data from the IED before resetting the
tripping and IED lockout functions.
5.3
IED parametrization
IED parameters are set via the LHMI, WHMI or PCM600.
Setting parameters need to be calculated according to the electrical network
conditions and the electrical characteristics of the protected equipment. The IED's
settings need to be verified before the IED is connected to a system.
Document all changes to parameter settings.
For more information, see PCM600 documentation.
5.3.1
IED settings for IED functionality
Function settings can be edited one by one by navigating to the individual setting
values, for example via the LHMI. The values in other setting groups should be
known before editing a certain setting value.
After completing the editing of setting group values, the new values are activated.
The user can either commit the edited values or discard them. Setting values can
also be copied from one setting group to another.
5.3.2
IED settings for different operating conditions
IED settings can be designed for various operation conditions by defining different
setting values to different setting groups. The active setting group can be changed
by the IED application or manually via the LHMI, WHMI or PCM600.
1MRS756708 C
Section 5
IED operation
615 series
71
Operation Manual
