A071164 V1 EN
Figure 79:
Setting IP address and subnet mask
5.
Close all open windows by clicking
OK
and start PCM600.
Administrator rights are requested to change the configuration
as described above.
Setting IED's IP address in PCM600
In PCM600 the IED's IP address can be defined via the first window of the wizard
by including a new IED in the project or by entering the IED's IP address in the
Object Properties window.
1.
Select the IED to which you want to define the IP address.
2.
Open the Object Properties window.
3.
Place the cursor in the IP Address row and enter the IP address.
The used method depends on the time at which the IP address is available.
Defining IP address in the Object Properties windows allows changing the IP
address at any time.
1MRS756708 C
Section 8
Commissioning
615 series
103
Operation Manual
