decimal values, the change can be fractions 0.1, 0.01, 0.001 (...) depending on
the active digit.
For parameters with defined steps, digits smaller than the step
value cannot be edited.
3.
Press
or
to move the cursor to another digit.
4.
To select the minimum or maximum value, select the arrow symbol in front
of the value.
•
To set the value to the maximum, press
.
•
To set the value to the minimum, press
.
A070756 V3 EN
Figure 22:
Arrow symbol is active, the value is set to the maximum
After pressing
, the previous value can be restored by pressing
once,
and vice versa. Another press of
or
sets the value to the lower or
higher limit. The symbol in front of the value is ↕, when the previous value is
shown.
A070757 V3 EN
Figure 23:
Restoring the previous value
4.1.12.2
Editing string values
1.
Activate the setting mode and select a setting.
1MRS756708 C
Section 4
Using the HMI
615 series
41
Operation Manual
