A071168 V3 EN
Figure 71:
Selecting the setting group value
Only values within the selected setting group can be changed.
7.
Press
or
to change the value and
to confirm the selection.
A070922 V3 EN
Figure 72:
Editing the setting group value
The active setting group is indicated with an asterisk * .
6.4.2
Activating programmable LEDs
1.
Select
Main menu/Configuration/Programmable LEDs.
2.
Select a programmable LED with
or
.
3.
Press
to enter the selection and
to change the programmable LED mode.
4.
Change the mode with
or
and press
to confirm the selection.
6.4.3
Setting autoscroll delay
Autoscroll delay parameter sets the delay of scrolling down measurements view if
it is set as default view and the user is logged out. Autoscroll is active if the delay
value is not zero.
1MRS756708 C
Section 6
Operating procedures
615 series
85
Operation Manual
