- 106 -
000567AG
6 - Instruments
POWER ALARM GFI ESC UP DOWN ENTER
By pressing the ENTER key, cyclic display
of the parameters can be:
Locked
Cyclical
Allows you to confirm the operation or enter the data set.
Allows you to read through the data in descending order on the
display, or when inserting, correct the value set by reducing it.
This allows you to read the data on the display by scrolling upwards,
or to increase the set value to correct it during data entry.
Allows you to exit the current mode
The “GFI” (ground fault) LED indicates that the inverter has detected a ground fault in
the DC side photovoltaic generator. When this fault is detected, the inverter immediately
disconnects from the grid and displays the relevant error indication on the LCD display. In
addition, the red LED may indicate also errors relating to the operation of the battery unit.
Indicates that the inverter has detected an anomaly. The type of problem will be shown in the display
Indicates that the inverter is functioning correctly.
When the unit is commissioned, while the grid is checked, this LED blinks. If a valid grid voltage is detected,
the LED remains continuously lit, as long as there is sufficient sunlight to activate the unit. Otherwise, the
LED will continue to blink until the sunlight is sufficient for activation. In this phase, the LCD display shows the
message “Waiting Sun...”
D
escription of the keyboard and status LEDs
Using the combination of the keyboard keys below the display, values
can be set or data can be viewed by scrolling.
In their various possible multiple combinations, the LEDs can indicate conditions that are
different from the original single one; see the various descriptions given in the manual.
In their various possible multiple combinations, the buttons allow you to obtain actions that
are different from the original single one; see the various descriptions given in the manual.
Скачано
с
сайта
интернет
магазина
https://axiomplus.com.ua/
