ABB HVC 200, Operation And Installation Manual, Page: 53 / 92

Procedure
1. Guide the cables to the terminals.
2. Connect these optical fiber cables for
the outlet 1:
•
Output cable (A) to the output
terminal D1-TD (B)
• Input cable (C) to the input
terminal D1-RD (D)
3. Repeat step 2 for the other outlets to
these terminals:
•
For outlet 2: connect the cables to
D2 (E)
• For outlet 3: connect the cables to
D3 (F)
• For outlet 4: connect the cables to D4 (G)
6.3.12 Installation procedure for the the long distance kit (optional)
Preliminary requirements
•
Procedure
1. Open the DC door. Refer to section 10.7 .
2. Connect the optical fiber cable that replaces the ethernet cable of the outlet.
Refer to section 6.3.10 .
3. Disconnect the ethernet cable from the ethernet-to-fiber converter. Refer to
section 6.3.13 .
4. Connect the ethernet cable to the connector. Refer to section 6.3.14 .
5. Repeat steps 2 thru 4 for each long distance kit that is installed.
6. Close the DC door. Refer to section 10.8 .
6.3.13 Disconnect the ethernet cable from the converter
Preliminary requirements
•
• Only do this procedure if another procedure refers to it.
1
2
C A
D
B
F E G
Installation
HVC 200/300/360-EN | 002 53