•
Make sure that the EVSE is connected to a grounded, metal, permanent wiring
system. If that is not possible, then an equipment-grounding conductor must be
run with the circuit conductors. The equipment-grounding conductor must be
connected to the equipment grounding terminal or lead on the product.
•
Make sure that the connections to the EVSE comply with all applicable local
rules.
2.11
Signs on the EVSE
Symbol
Description
General risk
Hazardous voltage that gives risk of electrocution
Risk of pinching or crushing of body parts
Rotating parts that can cause a risk of entrapment
Hot surface that gives risk of burn injuries
Appliance class 1
Sign that means that you must read the manual before
you use or install the EVSE
Waste from electrical and electronic equipment
Note: It is possible that not all symbols are present on the EVSE.
2.12
Discard the EVSE or parts of the EVSE
Incorrect waste handling can have a negative effect on the environment and human
health due to potential hazardous substances. With the correct disposal of this
Safety
18
HVC 200/300/360-EN | 002