ABB FSPS-21, User Manual

Page: 96 / 214

Used at Meaning Error #
Access to an unavailable description (parameter value
is available) No description data available 09h
Change access rights without rights to change para-
meters No operation priority 0Bh
Access to a text array that is not available (Parameter
value is available.) No text array available 0Fh
Access is temporarily not possible for reasons that are
not specified in detail. Request cannot be executed because of
operating mode 11h
Change access with a value that is within limits but is
not permissible for other long-term reasons (parameter
with defined single values) Value impermissible 14h
The length of the current response exceeds the max-
imum transmittable length. Response too long 15h
Illegal value or value that is not supported for the attrib-
ute, number of elements, parameter number or sub-
index, or a combination Parameter address impermissible 16h
Write request: Illegal format or format of parameter
data that is not supported Illegal format 17h
Write request: Number of values of the parameter data
does not match the number of elements at the paramet-
er address. Number of values inconsistent 18h
– Manufacturer-specific error area 65h …
FF
Vendor-specific error Vendor-specific error 65h
Request not supported Request not supported 66h
Request cannot be completed because of a communic-
ation error. Communication error 67h
Failure during write to non-volatile memory Non-volatile error 6Eh
Request aborted because of a timeout. Time-out error 6Fh
Parameter cannot be mapped to PZD (size mismatch
or non-existent). PZD map failure 78h
Parameter cannot be mapped to PZD (out of memory). PZD memory failure 79h
Parameter cannot be mapped to PZD (multiple PZD
write). Multiple PZD map 7Ah
Cannot map Control word bit (parameter 933…937,
e.g., double mapping of bits). Control word bit map 82h
Cannot change mode to TORQUE (frequency is used). Set torque mode error 8Ch
The request ID of the response is illegal. Illegal Request ID 90h
Buffer overflow Internal buffer 96h
Communication error between the module and the
drive Internal communication A0h
96 PROFINET IO – Communication protocol