ABB FSPS-21, User Manual

Page: 79 / 214

54 PROFINET IO – Communication profiles
State machine for the positioning mode
The PROFIdrive state machine for the positioning mode is shown
below.
State
condition
E
F
(SW Bit10,13=1)
(CW Bit4,5=1
and
CW Bit6
edge 0
Ÿ
1)
CW= Control word
SW = Status word
PROFIdrive
State machine
for PROFIdrive
positioning mode
(CW Bit11=1)
(SW Bit10,11,13=0)
BASIC STATE:
Operating
1)
HOMING
RUNNING
(SW Bit10,11,13=1)
HOMING
READY
(CW Bit11=0)
(SW Bit10,13=0)
Traversing task
active
(CW Bit5=0)
(CW Bit5=0)
(SW Bit10,13=0)
Braking with
ramp
Intermediate
stop
(CW Bit6 edge
0
Ÿ
1)
F
F F
(SW Bit10,13=0)
(CW Bit4=0)
Braking with
ramp
E
1)
In the “Operating”
state of the general
state machine:
SW bits 0, 1 and 2 = 1
SW bit 6 = 0.
F
PROFIdrive_state_machine_posit.pdf
￭ References
ABB drives can receive control information from multiple sources including analog and digital
inputs, the drive control panel and a fieldbus adapter module (for example, FSPS-21). To
have the drive controlled through PROFINET, you must select the module as the source
for control information, for example, reference.
PROFINET IO – Communication profiles 79