ABB FSPS-21, User Manual

Page: 53 / 214

Default Description Name/Value No.
N/A Read-only . Displays the parameter table revision of
the fieldbus adapter module mapping file stored in the
memory of the drive. In format
xyz , where
x = major revision number
y = minor revision number
z = correction number
OR
in format
axyz , where
a = major revision number
xy = minor revision numbers
z = correction number or letter.
FBA A/B par table ver 28
Parameter table revision
N/A Read-only . Displays the drive type code of the fieldbus
adapter module mapping file stored in the memory of
the drive.
FBA A/B drive type
code 29
Drive type code of the fieldbus adapter module map-
ping file
N/A Read-only . Displays the fieldbus adapter module
mapping file revision stored in the memory of the drive
in decimal format.
FBA A/B mapping file
ver 30
Mapping file revision
0 = Idle
or
4 = Offline
Read-only . Displays the status of the fieldbus adapter
module communication.
Note: The value names may vary by drive.
D2FBA A/B comm
status 31
Note: Only active drive-controlled channel will change
comm status online . PROFIsafe alone will not change
the comm status.
Adapter is not configured 0 = Idle
Adapter is initializing. 1 = Exec.init
A timeout has occurred in the communication between
the adapter and the drive. 2 = Time out
There is an internal error in the communication
between the adapter and the drive. Contact your local
ABB representative. 3 = Conf.err
Adapter is off-line 4 = Off-line
Adapter is on-line 5 = On-line
Adapter is performing a hardware reset. 6 = Reset
N/A Read-only. Displays patch and build numbers of the
adapter module's firmware version in xxyy format,
where:
FBA A/B comm SW
ver 32
xx = patch number
yy = build number.
Example: If the firmware version (<ma-
jor>.<minor>.<patch>.<build>) is 3.10.200.13, the value
C80D is displayed. If the version is 3.10.0.0, the value
0 is displayed.
See also parameter 33.
PROFINET IO – Start-up 53