Description
Parameter
Not selected – Select weld parameters during ignition phase
manually.
Use Weld Phase
Selected – Use the parameters from the
Weld
tab. This is the
default mode.
The job (schedule) that should be selected within the welder.
Job number
The information displayed in the
Job number
is:
Job number, Job name.
The process type that is active for the selected job.
ProcessType
Available process types are:
•
MIG/MAG Pulse Synergic
•
MIG/MAG Standard Synergic
•
MIG/MAG PMC
•
MIG/MAG LSC
•
MIG/MAG Standard Manual
•
Electrode
•
TIG
50
Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface
3HAC065012-001 Revision: C
© Copyright 2004-2021 ABB. All rights reserved.
4 Weld editor interface
4.3 Weld editor in Job mode
Continued
Summary of Contents for Fronius TPS 320i
